Where to buy | Partner Portal | eShop

USB VGA Over IP KVM Extender (1920 x 1080@Unlimited Distance)

Discontinued
CE790
  • Remotely access computers on your KVM installation via intranet
  • Dual console operation - control your system from both the transmitter and receiver USB consoles
  • High resolution video - up to 1920 x 1080
  • Audio enabled
MSRP: Quote Upon Request

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.

The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners.
* The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details.

* In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.

Package Contents

  • 1x CE790T Digital KVM Extender (Transmitter)
  • 1x CE790R Digital KVM Extender (Receiver)
  • 1x Custom KVM Cable (VGA, USB, Audio; 1.8m/6ft)
  • 2x Power Adapters
  • 2x Rack Mount Kits
  • 2x Grounding Wires
  • 1x User Manual
  • 1x Quick Start Guide
  • Remotely access computers on your KVM installation via intranet
  • Dual console operation - control your system from both the transmitter and receiver USB consoles
  • OSD (On Screen Display) on both the transmitter and receiver units
  • Supports GUI operation*
  • No software required - an HTTP server is embedded in both units
  • Built-in ASIC for greater reliability and compatibility
  • USB Keyboard and USB Mouse Ports
  • RS-232 serial ports** - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
  • Audio enabled
  • USB overcurrent detection and prevention
  • High resolution video - up to 1920 x 1080
  • Supports widescreen formats
  • Ultra-High quality video mode
  • Hot pluggable
  • Rack mountable
  • Firmware upgradable
  • Auto-MDIX - automatically detects cable type

    Note:
    * The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com).
    ** RS-232 serial ports support Tx/Rx signals only.
FunctionCE790RCE790T
Connectors
Console Ports2 x USB Type A Female (White)
1 x HDB-15 Female (Blue)
1 x Mini Stereo Jack Female (Green)
1 x Mini Stereo Jack Female (Pink)
2 x USB Type A Female (White)
1 x HDB-15 Female (Blue)
1 x Mini Stereo Jack Female (Green)
1 x Mini Stereo Jack Female (Pink)
KVM PortsN/A1 x SPHD-17 Female (Yellow)
1 x Mini Stereo Jack (Green)
1 x Mini Stereo Jack (Pink)
RS-2321 x DB-9 Male (Black)1 x DB-9 Female (Black)
Power1 x DC Jack (Black)1 x DC Jack (Black)
LAN Ports1 x RJ-45 Female (Black)1 x RJ-45 Female (Black)
Pushbuttons
OSD1 x Pushbutton1 x Pushbutton
Select1 x Pushbutton1 x Pushbutton
LEDs
Status1 (Green / Orange)1 (Green / Orange)
Power1 (Green / Red)1 (Green / Red)
Emulation
Keyboard / MouseUSBUSB
Power ConsumptionDC5.3V:6.86W:36BTU/h

Note:
● The measurement in Watts indicates the typical power consumption of the device with no external loading.
● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
DC5.3V7.49W:39BTU/h

Note:
● The measurement in Watts indicates the typical power consumption of the device with no external loading.
● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
VideoUp to 1920 x 1080Up to 1920 x 1080
Environmental
Operating Temperature0 - 50°C0 - 50°C
Storage Temperature-20 - 60°C-20 - 60°C
Humidity0-80% RH, Non-condensing0-80% RH, Non-condensing
Physical Properties
HousingMetalMetal
Weight0.50 kg0.50 kg
Dimensions (L x W x H)20.20 x 8.64 x 2.50 cm20.20 x 8.64 x 2.50 cm
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.





DescriptionVer.Release DateFile Name
Firmware Upgradev2.2.2182015-05-13 ce790_v2.2.218.zip
Firmware Upgradev2.2.2142014-06-12 ce790_v2.2.214.zip
Firmware Upgradev2.1.2072011-03-23 ce790_v2.1.207.zip
Firmware Upgradev2.1.2042011-01-18 ce790_v2.1.204.zip
Firmware Upgradev1.1.1052010-02-24 ce790_v1.1.105.zip
OSDescriptionVer.Release DateFile Name
Others
GUI Softwarev2.1.2042011-01-18 ce790_GUI_v2.1.204.zip
We are here to help! Please visit ATEN eService for technical assistance.